Many people probably don't want to do the troublesome task of cleaning the bathtub.
However, it is best to clean the bathtub every day.
Here, we explain five correct ways to clean the bathtub and five preventive measures to keep it clean with simple cleaning.
We also explain when it's best to hire a professional cleaner, as some types of dirt and locations can be difficult to clean yourself.
Bathrooms are hot and humid, making them prone to bacteria and black mold.
Bathrooms are hot and humid environments where bacteria can easily multiply.
Dirt that flows out and adheres each time you use the bath serves as food for bacteria.
Therefore, if the frequency of bathroom cleaning is low, dirt accumulates and bacteria multiply.
Furthermore, black mold that has multiplied by feeding on dirt, if left uncleaned, will become so stubbornly caked on that it cannot be removed by simply scrubbing.
Daily cleaning is ideal for the bathroom.
Bathrooms accumulate a lot of dirt, such as sebum from the human body, shampoo, and soap scum.
Therefore, it is ideal to clean the bathroom every day if possible.
However, busy people may not have time to clean the bathroom every day.
Even in the worst case, we recommend cleaning it at least every two days.
5 Correct Cleaning Methods
While daily cleaning is ideal for the bathroom, it's essential to know the correct cleaning methods to achieve better results.
Here are five correct cleaning methods.
1. For the bathtub and lid, first pour hot water to loosen the dirt. Baking soda can also be used!
To clean the bathtub, first pour hot water over it to loosen the dirt. Then, use a neutral bathroom cleaner and a sponge to remove the dirt. By loosening the dirt, you won't need to scrub too hard to get it off.
When cleaning the lid, the process is the same: pour hot water and use bathroom cleaner and a sponge to remove dirt. After that, carefully scrub the grooves on the lid with a brush.
.
A simpler way to clean the lid without using detergent is with baking soda. In this case, it should be soaked overnight, so it's recommended to do it after your evening bath. After bathing, add 1 cup (200ml) of baking soda to the leftover bath water. Then, put the bath lid in and let it soak overnight.
2. Use mold-specific cleaner for drain cleaning.
The drain is a place where dust tends to accumulate and mold easily grows. Since slime is the main problem, it's best to use a specialized cleaner for mold. It's convenient to use disposable plastic gloves. For sealed containers that are part of the drain, sterilize them with these specialized cleaners.
If you are concerned about the chemicals used in detergents, you can also use baking soda and citric acid. Apply 100g of baking soda and 50g of citric acid to the parts, pour in one cup of hot water, and wipe away the dirt while bubbles are forming. Once it's clean, rinse off the dirt and baking soda from the parts and return them to their original positions.
3. For walls, use acidic detergents or citric acid. For stubborn water stains on the floor, use toothpaste.
Walls tend to accumulate alkaline dirt from soap scum, but acidic dirt also adheres to lower areas, such as below the waist. It's best to clean walls with an acidic detergent, such as a bathroom cleaner, or by spraying vinegar or citric acid and scrubbing with a sponge or brush.
For floor cleaning, use bathroom detergent and a brush. However, for stubborn water stains on the floor or tiles, the only way to remove them is by scraping. This is where toothpaste comes in handy. You can remove them cleanly by using toothpaste with an abrasive.
4. Baking soda spray is convenient for cleaning mirrors!
For cleaning mirrors, a baking soda spray made by mixing baking soda and hot water is convenient. Spray this all over the mirror, then cover it with kitchen paper, followed by plastic wrap.
Also, avoid using strong abrasives like cleansers to clean mirrors. This can create fine scratches on the surface, which will then easily accumulate dirt.
5. To clean the ventilation fan, remove the cover and filter.
To clean the ventilation fan, remove the cover and filter, then carefully remove any debris from the filter with a vacuum cleaner. Wipe the cover clean and then reassemble the filter and cover.
For general ventilation fans, the entire propeller can be pulled forward to remove the fan. After removing it, wipe off any dirt with a rag. If the dirt is severe, such as mold, it can be thoroughly removed by soaking it in leftover bath water and chlorine bleach.
5 Daily Preventive Measures
Here are some simple preventive measures you can take during your daily bath to keep your bathroom clean with minimal effort.
1. After bathing, rinse the bathroom with a shower and wash the floor 2-3 times a week.
After bathing, shower the entire bathroom to rinse off the walls and floor. This alone will mostly wash away dirt such as sebum from the bath.
Tiled bathroom floors are prone to mold growth in their crevices. Wipe them with a bath cleaning sponge 2-3 times a week.
2. Clean the storage areas for shampoo and other items as well.
Rinse the storage areas in the bathroom for shampoo and other items with a shower. Recessed areas like storage spaces tend to accumulate dirt such as soap scum, which can lead to the growth of black mold. Scrub them with a sponge a few times a week.
3. Clean the bathtub immediately after draining the bathwater.
Dirt inside the bathtub becomes much harder to remove once it dries and cools. Therefore, try cleaning the bathtub immediately after draining the water after bathing.
4. Spray the entire bathroom with cold water.
Dirt inside the bathtub becomes much harder to remove once it dries and cools. Therefore, try cleaning the bathtub immediately after draining the water after bathing.
5. Be especially careful during humid seasons! Wipe away moisture with a towel after bathing.
During humid seasons like the rainy season and summer, wiping down the inside of the bathroom with a towel at the end can further prevent the growth of mold and other bacteria.
Keep the bathroom's ventilation fan running until the bathroom is dry. It's also important to consciously ventilate by leaving the door open and, if there's a window, opening it appropriately.
In these three cases, contact a professional!
While we've introduced cleaning methods and maintenance techniques you can do at home, some types of dirt and locations can be difficult to clean.
1. Cleaning the apron where mold easily grows
The "apron," which is the exterior and paneling of the bathtub, is the area where mold grows most easily. If the dirt becomes severe, we recommend hiring a professional.
2. Cleaning ceilings and ventilation fans that are often neglected.
The bathroom ceiling is a difficult place to clean and tends to accumulate dirt. If left unchecked, mold can take deep root.
Even if it doesn't look dirty, mold spores can be present, and mold remover is used for cleaning. Additionally, the ceiling fan (sirocco fan), which is difficult to disassemble and clean, is also disassembled to carefully remove mold and dust from inside.
3. Commercial cleaners are effective for mold removal! Mold removal and anti-mold water-repellent coating.
When mold grows in the bathroom, commercial cleaners can be used for removal, but if you ask a professional company, they can perform mold removal and anti-mold water-repellent coating. They will apply mold remover mainly to the moldy areas of the entire bathroom (tile grout, packing, caulking, etc.), and then remove it with a brush or similar tool.
After removing all mold from the bathroom, rinse thoroughly with running water to remove cleaning residues. Then, an anti-mold water-repellent coating is applied to maintain a clean state for a long time.
The best way to keep your bathroom clean is to clean and prevent mold daily.
To keep your daily-use bathroom clean, it's best to implement daily cleaning and preventative measures. While some types of dirt and locations can be difficult to clean, we recommend hiring a professional cleaner in case of stubborn issues.
▶If you're doing it yourself, this is it | King of Air | Saikyokun
